A premium quality, low lustre, alkyd enamel. Satin Impervo® Alkyd Low Lustre Enamel (Z235) possesses superb leveling and hiding qualities, and is easy to apply with brush, roller or spray gun. It has excellent sag resistance, clings to sharp edges and corners. Satin Impervo by Benjamin Moore – Alkyd Satin Finish reaches its normal satin finish in one week.
Satin Impervo by Benjamin Moore Easy to apply with brush, roller or spray gun
Covers surfaces in one coat, provided they are in good repaint condition and color change is not extreme
Rust preventative coating
Possesses superb leveling and hiding qualities
Excellent sag resistance
Clings to sharp edges and corners
Satin Impervo by Benjamin Moore is recommended for use on metal and substrates such as steel, wrought iron and aluminum. Do not apply directly to galvanized metal. Note: All alkyd-based enamels experience a certain amount of yellowing. This effect is accelerated in dark or poorly ventilated areas.
New surfaces should be fully primed, and previously painted surfaces may be primed or spot primed as necessary. For best hiding results, tint the primer to the approximate shade of the finish coat, especially when a significant color change is desired. Special Note: Certain custom colors require a Deep Base Primer tinted to a special prescription formula to achieve the desired color. Consult your retailer.
Stir thoroughly before and occasionally during use. Apply one or two coats. For best results, use a Benjamin Moore® custom-blended nylon/polyester or china bristle brush, Benjamin Moore® roller, or a similar product. This product can also be sprayed. Do not mix other paints or enamels with Satin Impervo® Finish Enamel (Z235). Do not apply when temperature of air/surface is below 50°F (10°C). Do not thin.
Spray, Airless: Fluid Pressure — 1,500 to 2,500 PSI;
Tip — .011–.015 Orifice